| |
Industrial Stainless Steel Coro-Vane
Pumps |
Corken's Sabre Series SSV pumps are positive displacement pumps. They produce
a maximum differential pressure of 200 psig (13.8 bar g). This pump line currently
provides capacities of up to 65 gpm (246 L/min). These pumps can handle discharge
pressures up to 400 psig (27.6 bar). Product Features |
 |
- 316 stainless steel construction
- Self-aligning
drive design. Eliminates costly alignment procedures, extends pump/ seal life.
-
Low residual liquid remains in pump between cycles. Reduces potential for cross
contamination.
- Universal gland accepts most cartridge and component mechanical
seals. Flexibility in sealing saves time and costs associated with upgrading sealing
as liquids or environmental needs change.
- Port dimensions match
other common vane pump designs
- Connect directly to 1,750 or 1,150 rpm
motors, thus saving space and eliminating the need for costly speed reduction.
- Large
openings in bracket allow for visual inspection of seal and access to seal gland
bolts. Modularity throughout pump line.
- Sealing set screws engage onto
recessed shaft diameters.
| Long
Life and Ease of Maintenance
The pump has a back pull-out design
that allows servicing entire pumping chamber through removal of four head bolts.
It is therefore not necessary to service the pump in the production area and disturb
the piping. Hoists or lifting equipment is not required. The pump design includes
removable pump casing cams (liners) and reversible/replaceable side plates which
reduce maintenance costs. All of these maintenance procedures can be preformed
in minutes. | |
| |
Corken, Inc.
A Unit of IDEX Corporation
3805 N.W. 36th Street, Oklahoma City, OK 73112 U.S.A.
(405) 946-5576
FAX
(405) 948-7343 If you have any problems using our
site please contact the Webmaster.
© All Contents Copyrighted Property of Corken, Inc. All rights reserved.
|
Products 
