Liquid Controls, A Unit of IDEX Corp.

 

       

  Products
    LPG Products
        Compressors
        Stationary Pumps
        Truck Pumps
- Specifications
- Performance Curves
- Troubleshooting
- Selection Assistance
- Publications
        Bypass Valves
    Industrial Pump
    Petroleum Pumps
    Industrial Compressors

  Selection Guides

  Publications

  Customer Service

  About Corken

  IDEXconnect

  Distribution Network

  IDEX Business Units

IDEX Corporation
 


Truck Pump—Z3200 Performance Curves

Pump SpeedDifferential PressureApproximate Delivery on Propane* Brake HP Required Pump Torque Required
rpm
psi(bar)
gpm(L/min)
bhp(kW)
Ft. Lbs.(N-m)
800
800
50
100
(3.4)
(6.9)
121
110
(460)
(420)
6.6
10.6
(4.9)
(7.9)
43.4
69.3
(58.9)
(94.0)
650
650
50
100
(3.4)
(6.9)
98
88
(371)
(333)
5.2
8.2
(3.9)
(6.1)
42.0
66.3
(57.0)
(89.9)
500
500
50
100
(3.4)
(6.9)
73
63
(276)
(238)
3.8
5.8
(2.8)
(4.3)
39.9
60.9
(54.1)
(82.6)

* This chart shows approximate delivery rates as seen in vapor equalized propane systems at 70°F (21°C) with no pressure loss in pump suction piping. The following will cause increased vaporization of the liquid in the pump suction, adversely affecting the delivery:

  1. Restriction in the suction piping such as internal valves, excess flow valves, elbows, etc.
  2. Restriction or lack of a vapor return line.
  3. Temperatures below 70°F (21°C).

This loss of delivery is not caused by the pump but is a result of the natural thermodynamic properties of the liquefied petroleum gases. See the Guide to Corken Liquefied Gas Transfer Equipment CP226 for additional information.

 

 

Corken, Inc.
A Unit of IDEX Corporation
3805 N.W. 36th Street, Oklahoma City, OK 73112 U.S.A.
(405) 946-5576 FAX (405) 948-7343

If you have any problems using our site please contact the Webmaster.
© All Contents Copyrighted Property of Corken, Inc.All rights reserved.
Terms of AccessPrivacy Policy